Price: $82.99
(as of Aug 15,2023 08:38:47 UTC – Details)



Technical parameters of FSH-2A adjustable high-speed homogenizer:

Motor speed: 8000-22000 rpm

Rated power: 220W

Rated voltage: 110V

Rated frequency: 60HZ

Adjustment system: knob

Working head size:

1212G: diameter 12mm, length 120mm

1218G: diameter 18mm, length 120mm

Processing capacity: 5-1000ml

Weight: 7KG

Size: 27*17*40cm

Working mode: alternate 5 minutes

Working method: internal cutting tool

Contact material: stainless steel and polytetrafluoroethylene

Note for FSH-2A adjustable high-speed homogenizer:

The instrument should be placed on a horizontal work surface, and the homogenization knives required for installation must be in place. When turning on the power to test the machine, first use a cup or utensil filled with water to submerge the plum blossom knife head in the water, turn on the power switch, and adjust slowly Turn the speed knob to fast and there is no obvious metal friction sound (if there is metal friction sound, turn off the power, loosen the 6M/M clamping screw of the tool, turn the outer fixing sleeve into place at random, and then tighten it) before it can work.

Cut the plants or microorganisms to be tested into small pieces or pieces, put them in the supplied glassware, clamp them in the middle of the magnet bracket (seven-shaped), loosen the 8M/M fixing screws of the fixed motor base, and slowly align them Move the mouth of the vessel down so that the homogenization head is 2-3mm away from the bottom of the vessel, and then tighten the 8M/M screws.

Note: After each work, remove the knives and rinse them with water to dry.
FSH-2A adjustable high-speed homogenizer instrument maintenance: After long-term use, the PTFE in the high-speed disperser cutter is a vulnerable part for users to replace.Various animal and plant tissues can be homogeneously mixed；
It can break the cell membrane, separate and split DNA strands into small molecules at different speeds
It can be used as a stirrer at low speed, high-speed digital display, intuitive reading.
The meter adopts a high-speed thyristor control system, and the Hall element speed measurement adopts advanced electronic circuits. The digital display is clear and easy to use